Trade Metal Fabrication UK from Northampton Signs
Northampton Signs provides reliable trade metal fabrication UK services for sign companies, contractors, designers, fit-out specialists and other manufacturers requiring bespoke metal components.
From our in-house Northampton workshop, we can manufacture individual components, prototypes, short production runs and repeat batches using supplied drawings, dimensions and technical specifications.
Our trade fabrication service can support businesses that require additional manufacturing capacity, specialist metal-forming equipment or components that cannot be produced efficiently using their own facilities.
All trade enquiries can be handled confidentially by our production team.
Subcontract and Trade Metal Fabrication UK
Our subcontract metal fabrication service allows other businesses to outsource part or all of their manufacturing requirements to an experienced production team.
We can work from:
- PDF drawings
- CAD exports
- Production drawings
- Technical specifications
- Templates
- Physical samples
- Photographs with dimensions
- Clearly marked sketches
Before manufacturing begins, our team reviews the material, dimensions, tolerances, quantities, finish and intended application.
Where information is incomplete, we can identify the additional details required to assess the component accurately.
Trade Metal Fabrication Services
Our trade metal fabrication UK capabilities can include:
- Rolled metal panels
- Curved sign trays
- Fabricated sign trays
- Metal frames and support structures
- Lightbox bodies
- Built-up lettering components
- Bespoke brackets and fixing plates
- Folded aluminium sections
- Channels and profiles
- Protective covers
- Pipe and service enclosures
- Architectural metal components
- Powder-coated components
- Prototype fabrication
- One-off components
- Short production runs
- Repeat manufacturing
Each project is assessed according to the material, thickness, dimensions, fabrication process, finish and quantity required.
Rolled Metal Panels and Curved Components | Trade Metal Fabrication UK
Our in-house 3500 mm power roller allows us to manufacture curved sheet-metal components for trade customers.
This can include:
- Curved fascia panels
- Curved sign trays
- Cylindrical sections
- Semi-cylindrical components
- Curved lightbox bodies
- Architectural panels
- Protective metal covers
- Bespoke rolled profiles
Our power roller has a working width of up to 3500 mm and can roll mild steel up to approximately 6 mm thick. It can also form box sections up to approximately 25 mm deep and achieve a minimum radius of approximately 450 mm.
Final capacity depends on the material grade, thickness, width, profile and required radius.
Longer rolled components can reduce the number of joints, welds and separate sections required, helping to create a cleaner finished product.
Fabricated Frames and Support Structures | Trade Metal Fabrication UK
We can manufacture bespoke frames and supporting structures for signage, architectural features, retail displays and commercial installations.
Fabrication may include:
- Steel or aluminium box-section frames
- Welded support structures
- Internal sign frameworks
- Mounting plates
- Brackets
- Base plates
- Reinforcement components
- Installation supports
- Bespoke fixing arrangements
Frames can be manufactured to suit supplied drawings or developed as part of a wider component specification.
Folded Aluminium Sections | Trade Metal Fabrication UK
Folded aluminium is commonly used for lightweight, corrosion-resistant components in signage, construction and commercial interiors.
Our trade fabrication service can produce:
- Sign trays
- Channels
- Returns
- Cappings
- Fascia sections
- Encasements
- Protective covers
- Lightbox components
- Folded panels
- Bespoke profiles
The required aluminium grade, thickness, dimensions and finish should be confirmed before production.
Protective Covers and Enclosures | Trade Metal Fabrication UK
We manufacture bespoke metal covers and enclosures for equipment, pipework, cabling and building services.
These can include:
- Straight sections
- Corners
- End caps
- Removable panels
- Sloping covers
- Curved enclosures
- Ventilated sections
- Access panels
- Bespoke profiles
Components can be supplied unfinished or completed in a specified painted or powder-coated finish.
Prototype and One-Off Fabrication | Trade Metal Fabrication UK
Not every project requires a large production run.
We welcome enquiries for:
- Prototypes
- Samples
- Test components
- One-off products
- Replacement components
- Specialist parts
- Bespoke display features
- Unusual curved metalwork
Prototype fabrication allows the design, assembly and appearance of a component to be reviewed before repeat manufacturing begins.
Where appropriate, adjustments can be made to improve production efficiency, assembly or installation.
Repeat Production
Once a component has been approved, we can manufacture repeat batches to a consistent specification.
Repeat production may be suitable for:
- Multi-site signage programmes
- Retail rollouts
- Standardised sign trays
- Lightbox components
- Pipe encasement systems
- Brackets and fixing components
- Protective covers
- Architectural metal features
- Product manufacturing
Supplying clear drawings and approved samples helps maintain consistency across repeat orders.
Finishing Options
Trade-fabricated components can be supplied unfinished or completed with a suitable finish.
Available options may include:
- Powder coating
- Wet painting
- Selected RAL colours
- Surface preparation
- Grinding and weld finishing
- Brushed metal finishes
- Polished metal finishes
- Signage graphics
- Final assembly
Finishing requirements should be stated when requesting a quotation.
Components Ready for Further Assembly
We can supply fabricated metalwork at the stage that best suits your production process.
Components can be provided:
- As individual fabricated parts
- Ready for welding
- Fully welded and assembled
- Drilled and prepared for fixing
- Powder coated
- Ready for graphics
- Ready for illumination
- Ready for customer installation
- Packaged for delivery to site
This allows trade customers to outsource only the fabrication processes they require.
Confidential Trade Metal Fabrication UK
We understand that trade customers may be working on behalf of their own clients.
Confidential fabrication enquiries can be reviewed directly with our production team. Project information, drawings and customer details will be handled professionally.
Where appropriate, components can be supplied without Northampton Signs branding so they are ready for onward delivery, assembly or installation by the trade customer.
Materials We Work With
Depending on the component and application, our trade fabrication work can include:
Aluminium
Aluminium is lightweight, corrosion resistant and commonly used for sign trays, lightboxes, fascia panels and architectural components.
Mild Steel
Mild steel provides strength for frames, supports, brackets, rolled components and fabricated structures.
Stainless Steel
Stainless steel is suitable for commercial, architectural and hospitality applications where durability and appearance are important.
The correct material will depend on the component size, location, strength requirements, appearance and budget.
Our Process | Trade Metal Fabrication UK
1. Enquiry and Drawing Review
We review the drawings, dimensions, quantities, material and required finish.
2. Production Assessment
Our team considers the cutting, rolling, folding, welding and assembly processes required.
3. Quotation
A quotation is prepared based on the confirmed specification and production requirements.
4. Material Preparation
The selected material is measured, cut, drilled and prepared for fabrication.
5. Fabrication
Components are rolled, folded, welded or assembled according to the approved information.
6. Finishing
Where required, the fabricated parts are prepared for painting, powder coating or another specified finish.
7. Quality Checks
Dimensions, assembly points and overall finish are checked before dispatch.
8. Collection or Delivery
Completed components can be collected from our Northampton workshop or delivered to an agreed location.
Why Use Northampton Signs for Trade Metal Fabrication UK?
In-House Manufacturing
Our metal fabrication work is completed through our Northampton workshop, giving us direct control over production.
Specialist Power-Rolling Capacity
Our 3500 mm power roller supports larger curved components and bespoke profiles.
Signage Manufacturing Experience
We understand how fabricated metalwork integrates with acrylic, LEDs, vinyl graphics, fixings and installation systems.
Flexible Production Volumes
We can consider prototypes, one-off components, small batches and repeat production.
Complete Fabrication Support
Rolling, folding, welding, drilling, assembly and finishing can be combined within one project.
Confidential Service
Trade enquiries can be handled discreetly, allowing customers to maintain their own relationship with the end client.
Information Required for a Quote | Trade Metal Fabrication UK
To receive an accurate quotation, provide:
- Technical drawing or sketch
- Overall dimensions
- Material type
- Material grade, where known
- Material thickness
- Required quantity
- Required radius or profile
- Tolerances
- Fixing details
- Welding requirements
- Finish or RAL colour
- Delivery postcode
- Required completion date
- Any confidentiality requirements
The more complete the information, the more accurately our team can assess the production method and cost.
Frequently Asked Questions
Do you work with other sign companies?
Yes. We provide confidential subcontract fabrication for sign companies requiring components, additional capacity or access to specialist machinery.
Can you manufacture from supplied drawings?
Yes. We can work from PDF drawings, CAD exports, production files, sketches and other clearly dimensioned information.
Do you accept one-off components?
Yes. We consider prototypes, replacement parts, individual components and other one-off fabrication requirements.
Can you manufacture repeat batches?
Yes. Once the specification or sample has been approved, we can produce repeat batches to the agreed requirements.
Can components be supplied unfinished?
Yes. Components can be supplied unfinished, partially completed or fully fabricated and powder coated.
Can you roll curved metal components?
Yes. Our in-house 3500 mm power roller can manufacture curved panels, trays and profiles, subject to the material and component specification.
Can you provide powder coating?
Yes. Fabricated components can be powder coated in suitable standard or specified colours, including selected RAL colours.
Will you deal directly with our customer?
Only where agreed. Trade projects can be handled confidentially, with communication managed directly through the trade customer.
Request a Quote | Trade Metal Fabrication UK
Looking for trade metal fabrication UK services?
Send Northampton Signs your drawings, dimensions, quantities, materials and finishing requirements. Our production team will review the project and advise how the components can be manufactured.
Contact us for a free consultation on your project. Get a free quote from here, while you can check our product brochure below for more information.